Still, some people complain that the nozzle hits the clips during print jobs. So I’ve found that it’s best to slide the metal “keys” out of the clip, leaving only the flat-ish metal piece if you want to minimize the possibility of obstructing the nozzle. There are tons of things you can use to secure a glass plate to your 3D printer’s bed, and they don’t have to be expensive or fancy. The only real con to using double-sided thermal tape is that it may leave a residue. Yet, all you have to do is wipe your bed and plate down with some isopropyl alcohol to remove it. Painter’s tape makes for a suitable temporary solution, but it can come loose and wear down faster than the other clips and adhesives on this list. When you’re done, spritz your glass plate with a bit of isopropyl alcohol for an easy clean. 6. Double-Sided Thermal Tape

So, let’s look at these printer bed clip alternatives together. I’ll explain the pros and cons of each and help you find a bed clip solution that will work for you, your budget, and your 3D printer. 1. Custom 3D Printed Clips Still, you’ll have to change it out every once in a while, mainly if you use your heated bed at higher temps frequently. However, you get a lot of tape in one roll, and it’s incredibly affordable. However, they hold down the bed tightly and are easy to adjust, so in my opinion, they’re a great alternative.You can also use this tape for electrical purposes, so it’s never a bad idea to have some lying around. 7. Silicone Thermal Pad A silicone thermal pad is a grippy, conductive sheet that you can place between your glass plate and print bed. Still, these clips aren’t any better than the brand-name printer bed clips, and they may still obstruct your nozzle. However, if you only want an alternative clip because you’re on a budget, then these are the way to go. Final Thoughts Unfortunately, these clamps aren’t low-profile, so you may have difficulty with the nozzle hitting them when you make larger prints. Painter’s tape is a convenient go-to tool for most 3D printers, and aside from being an excellent print bed adhesive, it can help you secure your glass print bed.

That said, the most significant pro of using painter’s tape is that you can print objects on top of it. So, you won’t have to sacrifice any space. 5. Hairspray The most common alternative to branded 3D printer bed clips is binder clips. These cheap, small metal office clips are helpful for any binding purpose. If you often use a glass plate, these are the way to go. They’ll last many years, and they don’t reduce the space on your print bed or obstruct the nozzle. printer bed clips tend to get in the way, and they will interfere with the area available on your print bed. However, what if I told you that you could secure anything to your print bed withoutusing bed clips with a bit of creativity?In addition, binder clips can give your 3D printer a bit of a custom look since they come in thousands of colorful designs. 3. C-Clamps