LEGO Technic Space Shuttle 8480

Product Information

It's hard to believe there once was a time, where we didn't have gear shifters. These are now so common-place in the Technic universe, that many sets wouldn't be possible without them. The Space Shuttle is the 2nd set to feature this system, after the 8880-1 Technic Super Car (next Classic Review?). One of the most noteworthy of the new parts is the Fiber Optics Element. According to multiple blogs, this element was so expensive to produce, LEGO lost money with every set the part came in. I can't find any proof of this, but knowing what the next years would bring (AKA the Dark Ages) makes me believe there can be some truth in it. Also, the system only appeared in a few sets in the span of 2 years.

LEGO Creator Expert 10283 NASA Space Shuttle Discovery review LEGO Creator Expert 10283 NASA Space Shuttle Discovery review

In excess of 1,500 additional pieces means the designers have been able to include even more accurate detailing and authenticity than ever before, but it wasn’t easy – as the interview with LEGO designer Milan Madge contained within the manual attests to. Several design features of the Shuttle proved to be a real headache, such as the retractable landing gear, and the interview does a great job in explaining how the design team overcame these hurdles, as well as building anticipation for the model to come. NOTE: This review was written before the release of the 10283-1 NASA Discovery Space Shuttle. Contents: Introduction Sullivan flew on three space shuttle missions and was the first American woman to complete a spacewalk as part of STS 41-G with the space shuttle Challenger on October 11, 1984.At first, I was afraid the set wouldn't hold up to today's standards. How much of the epic-ness of the set is just my nostalgia talking? Especially after reviewing the 8485-1 Control Centre II, which is a good set, but in functions a bit dated, I was preparing for some let-down. These two sub-assemblies connect at a slight angle, which is achieved in a rather unique way. Hinge plates are used at one end, but in the middle a 2×3 plate with hole connects to a 1×2 jumper plate. This allows for the angle of the 2×3 plate with hole to be adjusted, facilitating its attachment to the main assembly at an offset angle. Another option is letting both clutch gears activate the same drivetrain. Using different sized gears behind the clutch gear, you can create a gearbox, driving the drivetrain in different speeds, while the source stays the same speed. This system is utilized in the 8880-1 Technic Super Car. You can also activate the same drivetrain, but in a different direction. I don't know when this was used first, but I have seen it in the 42042-1 Crawler Crane and 42082-1 Rough Terrain Crane in recent sets. There are probably more.

NASA Space Shuttle Discovery - LEGO NASA Space Shuttle Discovery - LEGO

The build actually begins with the construction of the Hubble Telescope, arguably one of the most important scientific instruments ever created by man, and it is a stunning rendition. Perhaps it’s the building techniques utilised, or maybe it’s the subject matter itself, but everything about the model feels like it has a very precise and measured design. From the offset Technic pins used for the telescope’s angled stand to the intricate design created by the yellow 1×1 tap pieces, every stage creates the feeling of building a scientific instrument. It's mostly very enjoyable to assemble, despite those app quibbles. It's only really the end sequence that becomes frustrating, but it's worth it when you're so close to the finish line. If you're a big space fan, you'll particularly appreciate this. However, anyone who fancies something different from the usual Lego way of doing things will like what's here. Other sets to consider Engino also offers the London Eye in this range with a motorized engine. It's pricier but it looks suitably captivating for fans of London tourist locations. The focus is clearly on the functions and outline of the shape. The signature contours are combined with only hatched areas (wings, ribbed hatches), no panels in this time. There are 3 parts that play a key role here: 6542a Technic Gear 16 Tooth with Clutch, 6538b Technic Axle Connector Ridged and 6539 Technic Driving Ring 2L. The clutch gears have a round hole instead of an axle hole, so they can spin freely over an axle. When the axle is spinning, the clutch gears don't. The driving ring can slide over the axle connector, 'catching/clutching' one of the clutch gears, making it spin along with the axle, activating any drivetrain that is connected to the clutch gear. This way, you can turn drivetrains on and off, depending on which function you want to use.The front and rear gears are connected to one another through a large sub-assembly that runs the entire length of the hull. Pushing into the rear of the Shuttle will cause the landing gear to retract with a beautifully smooth motion. It may have been one of the hardest things to get right, but the designers can be proud of the finished result. In fact, it’s such a wonderful design that had the LEGO Group decided to release this separately, it would no doubt garner huge praise. As it is, this is just a small part of this set, and the fact there is a gigantic Space Shuttle to build next makes for a very exciting prospect.