TP-LINK Archer MR600 AC1200 4G+ Cat6 Mobile Wi-Fi Router Dual Band, 4G/3G Network SIM Slot Unlocked, No Configuration required, Support Guest Network & Parental Control, UK Plug

Product Information

How to troubleshoot if remote management does not work on LTE Gateway Router with 3G/4G Router mode 06-24-2022 28958 Press and hold this button until the Power LED starts flashing to reset the router to its factory default settings. MU-MIMO supported– ช่วยให้รับส่งข้อมูลหลายอุปกรณ์พร้อมกัน เพิ่มประสิทธิภาพและปริมาณการรับส่งข้อมูล WiFi ได้ดียิ่งขึ้น Please verify the hardware version of your device for the firmware version. Wrong ISP file upgrade may damage your device and void the warranty. （Normally V1.x=V1）

At the rear sit the four Gigabit Ethernet ports (if you’re only using 4G internet then you can use all of these for wired clients) and a SIM slot; this uses the 15mm micro-SIM format, but an adapter for nano-SIMs is thoughtfully included in the box so you can use whichever type you have to hand. By today’s standards, the Archer MR600 offers sub-par wireless performance. The 4G connection isn’t particularly fast either, while 5G speeds are forever out of reach. With various features and functions, the router is the perfect hub of your home or business network. An ISP file upgrade can update ISP information into the latest verison to improve it's current compatibility. To Upgrade Full Gigabit Ports– มาพร้อมกับพอร์ตเชื่อมต่อที่เชื่อถือได้ สำหรับใช้งานอุปกรณ์ที่ใช้งานแบนด์วิธปริมาณมาก เช่น เครื่องเล่นเกม หรือกล่อง IPTV เป็นต้น

Setup Video

To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.

A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade What should I do if no APN profile or wrong APN profile is detected by TP-Link Wireless 4G LTE Router? 05-16-2023 40672 IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process In wireless router mode, the LAN4/WAN port is used for connecting to a Cable/FTTH/VDSL/ADSL device.The technical specifications of Archer MR600 are very similar to the two predecessors. It supports 4G LTE Frequency bands as below: When you say the speed fluctuates is that when you're connected to WiFi, or hardwired Ethernet to the router? I'd always recommend using Ethernet when testing/debugging to eliminate any potential WiFi issues. Better Signal for Connections Everywhere– ด้วยเสารับสัญญาณ LTE คุณภาพทั้ง 2 เสา ที่สามารถถอดออกได้ให้คุณใช้งานอินเทอร์เน็ตผ่านอุปกรณ์ต่าง ๆ ได้อย่างเสถียรและมีประสิทธิภาพ The key feature the Archer boasts is its ability to use 4G carrier networks. This feature would be helpful to businesses operating away from fiber network infrastructure as internet connectivity can make or break a business. The sim card slot accepts micro/nano sim.Included in the box along with an RJ45 Ethernet cable, A nano to micro converter & the router itself.