APC AP9630 UPS Network Management Card 2

Product Information

Provides the ability to export a user configuration (.ini) file from a configured card to one or more unconfigured cards without converting the file to a binary file WARNING!- Connecting anon-APC serial cable to your devicecan causeunwanted, erraticdevice behavior. Device Description: Configure the power parameters: this enables you to show and configure transfer points, sensitivity and output voltage.

Connect the provided serial cable (part number 940-0299) from the selected port on the computer to the configuration port at the NMC. Use the user interface or the command line interface to view the status of the UPS and manage the UPS and the NMC. You can also use SNMP to monitor the status of the UPS.

You can use a local computer that connects to the Management Card through the serial port to access the command line interface. Any Smart-UPS ® model that has an internal expansion slot, or any Symmetra ® UPS except the Symmetra PX 250 or Symmetra PX 500 UPS NOTE: This method can be used to configure the embedded UPS NMC2 or optional secondary NMC2 for SRT models. The first issue I had is that the Forum post you linked in your first comment above is no longer accessible, the frontend of the forum appears to be up but all the post I try to access return a application error. the Knowledgebase which appears to be on the same system works but I have not found anything solutions that resolve my problem. Note: SNMP has Write + and Write access. Write + has top access and enables logging on when another user is already logged on. Write access is equivalent to Web access. Types of user accounts

Description: View a list of all the CLI commands available to your account type. To view help text for a specific command, type the command followed by help. Description: View a list of all the CLI commands available to your account type. To view help text for a specific command, type the command followed by a question mark. Find the firmware file. This one is “Network Management Card v6.5.0 Firmware for Symmetra 3-Phase with AP9630/AP9631/AP9635” below are Web-based, IPv6 Ready products that manage supported devices using multiple open standards such as: Have you tried rebooting the card itself and not just the UPS? The card has a reset button on it. If you press and hold it with a straightened out paper clip for about 10 to 15 seconds that will reboot the card. Sometimes rebooting the card is necessary to access it.

I think the authentication errors I see at this point in the process are the result of something else failing and are not actual authentication errors. NOTE: In NMC2 firmware version 6.8.0 and higher, and in NMC3, you cannot search for assigned devices already on the network using an IP range unless you enable SNMPv1 and set the Community Name to “public”. At the command line interface, use commands to configure the NMC. To use a command, type the command and press E NTER. Commands and arguments are valid in lowercase, uppercase, or mixed case. Options are case-sensitive. Thanks for reaching out. I am attaching the link to an APC forum post which will hopefully resolve this for you. printed format and on the Network Management Card Utility CD in PDF to configure the TCP/IP settings of the

Use thebootcommand to change the Network Management Card's boot mode ONLY if you are using DHCP or BootP. Kit includes all necessary parts to install an AP9635 for all G5000 UPS serial numbers and firmwares. The command response codes enable scripted operations to detect error conditions reliably without having to match error message text. If your network is setup correctly (described below),you will be able to access "unconfigured" / just-out-of-the-box NMCs by referencing the NMC as follows: I am using v4.4.0 of the Powerchute Network Shutdown on Windows server 2019 and the NMC is now on firmware version 6.9.6, the stat on the firmware is "P+ N4+ N6+ A+"

Kit includes all necessary parts to install an AP9635 for all G9000 UPS serial numbers and firmwares. IPv6 network configuration provides flexibility to accommodate the user's requirements. To configure the TCP/IP settings for IPv6, see the user interface online help for details on the options: Manual, Auto Configuration, DHCPv6 Mode under this menu: Administration > Network > TCP/IP > IPv6 settings. Network management features I have rules in place for Ports 80 and 3052 per several KB articles, i have not made any for 443 but I will shortly and try again.